B3 Line Array Series

R4/R8B 600W POWERED COMPACT LINE ARRAY SYSTEM (BLACK)

$2,582.00 plus

  • Each system comes complete with subwoofer, 4 mid-high line array cabinets, internal power amplification, DSP control, all rigging hardware and connecting speaker cables

  • Compact design for medium scale sound reinforcement

  • Internal amplification, and programmable DSP control (via USB and RS232 port) - gain, crossover, equalisation, compressor/limiter, and time alignment. Software included

  • Rear panel peak level indicator, level control

  • Two 8" low frequency drivers (R8 active amplification module)

  • Two 4" mid frequency drivers and one high frequency ribbon driver in each R4 line array module

  • 120º controlled horizontal coverage

  • Splay angle adjustable in 1º steps

  • XLR line input with XLR "loop through"

  • Mechanically connected cabinet design with three-point suspension system allowing flexibility in a variety of array configurations

Transducers:R8 Low Frequency: 2x8" Drivers
R4 Mid Frequency: 4x(2x4") Drivers 
R4 High Frequency: 4xRibbon Drivers

Frequency Response (-3dB):65Hz-40kHz

Dispersion (H x V):120º x (30º-90º) adjustable 

Internal Amplifier Rated Power (RMS):R8 (L): 300W; R4 (M/H): 4x75W

Rated SPL (1m):115dB

Max SPL (1m):121dB

Line Input Sensitivity:0.5V 

Input Impedance:

10kΩ

Input Connector:XLR female with XLR male "loop through" 

Speaker Connectors:NL4 

Power Supply:

230VAC 50Hz-60Hz

Net Weight:45.0kg

Gross Weight:50.0kg

Dimensions (W x D x H):L: 492 x 608 x 336mm; M: 492 x 250 x 542mm 

Packaging Dimensions 1pcs/pack:
(W x D x H)710 x 705 x 580mm

Warranty: 3 Years 

R4/R8W 600W POWERED COMPACT LINE ARRAY SYSTEM (WHITE)

$2,726.00 plus

  • Each system comes complete with subwoofer, 4 mid-high line array cabinets, internal power amplification, DSP control, all rigging hardware and connecting speaker cables

  • Compact design for medium scale sound reinforcement

  • Internal amplification, and programmable DSP control (via RS232 port) - gain, crossover, equalisation, compressor/limiter, and time alignment. Software included

  • Rear panel peak level indicator, level control

  • Two 8" low frequency drivers (R8 active amplification module)

  • Two 4" mid frequency drivers and one high frequency ribbon driver in each R4 line array module

  • 120º controlled horizontal coverage

  • Splay angle adjustable in 1º steps

  • XLR line input with XLR "loop through"

  • White finish

  • Mechanically connected cabinet design with three-point suspension system allowing flexibility in a variety of array configurations

R6/R12A 3000W POWERED COMPACT LINE ARRAY SYSTEM (BLACK)

$8,347.00 plus

  • Each system comes complete with 1 subwoofer, 4 mid-high line array cabinets, all rigging hardware and connecting speaker cables

  • Compact design for medium scale sound reinforcement

  • Internal amplification, and programmable DSP control (via USB and RS232 port) - gain, crossover, equalisation, compressor/limiter, and time alignment. Software included

  • Rear panel peak level indicator, level control

  • Flown or ground stack options

  • Two 12" low frequency drivers (R12A module)

  • Three 6" mid frequency drivers and one high frequency ribbon driver in each R6 line array module

  • 120º controlled horizontal coverage

  • Splay angle adjustable in 1º steps

  • 2 x Speakon connectors on each array cabinet

  • Black polyurethane finish with powered coated grill

  • Mechanically connected cabinet design with three-point suspension system allowing flexibility in a variety of array configurations

R6 Mid/High:
 

Transducers:Low Frequency: 2 x 6"
Mid Frequency: 1 x 6"
High Frequency:1 x Ribbon

Frequency Response (-3dB):80Hz-19KHz

Sensitivity (1W/1m):91dB

Crossover:Passive Full Range

Dispersion (H x V):120º x 30º

Rated Power (RMS):140W

Rated Impedance:8ohm

Maximum SPL:115dB, 121dB Peak

Cabinet:15mm Birch Plywood

Input Connectors:NL4 x 2

Net Weight:17Kg

Gross Weight:19Kg

Dimensions (W x D x H):730 x 363 x 174mm

Packaging Dimensions 1pcs/pack:
(W x D x H)830 x 450 x 230mm

  

R12A Subwoofer:

Transducers:Low Frequency: 2 x 12"

Frequency Response (-3dB):40Hz-300KHz

Sensitivity (1W/1m):92dB

Power Amplifier:3000W

DSP:Internal via USB

Maximum SPL:122dB, 128dB Peak

Cabinet:18mm Birch Plywood

Fly frame:Rated for two system hang

Net Weight:53Kg

Gross Weight:59Kg

Dimensions (W x D x H):736 x 667 x 542mm

Packaging Dimensions 1pcs/pack:
(W x D x H)815x 656 x 876mm

Warranty:3 Years

Please reload

About Us

Pretty Lights Productions was started in 2003 and has continuously grown and improved ever since. With many years of AV experience Pretty Lights Productions has setup amazing sound and performed stunning laser and Lighting Shows. 

Our Lasers are
powered by Pangolin