LED Wash Lights / Colour Bars

All prices based on a Weekend or 3 day Hire Policy: Collect Thursday evening (5pm to 7pm) Friday (9am to 5pm), Return on the Monday 9am to 7pm for the same single rate!

LED BARS & WASH & TUBES

Prices are for a weekend hire.

$20 Color Bar LED RGB - 8 Segments

$30 Led Wall Washer Light 24X3W RGB

$40 LED Colour Bar - 80x 3-in-1 LEDs 80x 3 in 1 LEDs - DMX IRC

The LCB803 is a LED bar with 80 pieces 3-in-1 LEDs. The LEDs are divided in separately controllable sections. Each section having its own RGB colour setting in DMX mode. While using the fixture in stand-alone mode there are 16 pre-programmed shows that you can run by sound activation. The extra IEC output enables you to simply link the power of multiple units together into a single socket.

80x 3W RGB 3-in-1 LEDs
Red, green and blue colour mixing
3, 6, 12, 24 or 48 DMX channels
1, 2, 4 or 8 Sections controllable
DMX and stand-alone mode
Master/slave synchronization
Sound activated with adjustable sensitivity
Auto mode with adjustable speed
DMX in-/output via 3-pin XLR
IEC-connector in-/output
Control panel with LED-display
IR-Remote control

$25 Colour Bar LED RGB - 8 Segments

$30 neo neon

Digital LED Tube - 1 Metre Long $10 EACH. CALL for a deal on more with led controler.

1m DIGITAL LED TUBE

A tubular, white translucent plastic LED light which uses numerous coloured LED's in eight sections. When a controller and amplifiers are combined, they can power up to 1000 digital LED tubes to produce various superb effects. The controller can operate up to 30 tubes or can drive 33 amplifiers, each amplifier can drive 30 digital LED tubes. Perfect for permanent installation in bars, clubs or shops.

Each run (up to 30 units) requires a pre-programmed controller (151.096) not supplied

144pcs (48 red, 48 green, 48 blue) very bright LED's, 50,000 hours life

IP rated (IP44)

Multiple units can be connected together (up to 30)

Supplied with 2 plastic mounting clips and fixing screws

Unit only needs a mains connecting lead (supplied) if only white light wanted, this must be used (one per run) along side the controller to get other colours.