We are located on the North Shore . Delivery is available
For bookings and quotes Email
Pretty Lights Productions
Your Sound and Lighting Experts
Subwoofer Hire
All prices based on a Weekend Hire Policy: Collect Thursday evening (4pm to 7pm) Friday (9am to 5pm), or Saturday morning (9am to 11am) and Return on the Monday for the same single rate!
$120 2x RCF 800watt bass bins
$200 1x amp 2x MX-218B twin 18inch Sub
- Dual 18 " high efficiency 4 " voice coil low
frequency transducers with aluminium die-cast
frames.
- High Power Handling Capabilities up to 6400
Watts.
- Specially designed dual chamber enclosure
allowing for use of single or dual amplifier
channels via recessed switch on the connector
plate.
- 4 ohm parallel, single channel or discrete 8 ohm
dual channel configurations available.
- 4 " heavy duty castors for ease of mobility.
- Four integral carry handles.
- 18mm (3/4 " ) birch plywood construction.
frequency transducers with aluminium die-cast
frames.
- High Power Handling Capabilities up to 6400
Watts.
- Specially designed dual chamber enclosure
allowing for use of single or dual amplifier
channels via recessed switch on the connector
plate.
- 4 ohm parallel, single channel or discrete 8 ohm
dual channel configurations available.
- 4 " heavy duty castors for ease of mobility.
- Four integral carry handles.
- 18mm (3/4 " ) birch plywood construction.
$100 HIGH POWER 2000W RMS POWERED 2 x 12" SUBWOOFER
High output SPL and sensitivity
Two 12" high power low frequency driver
2000w power amplifier built in
Volume control
High cut control on output
Computer aided design to optimise frequency and phase response
Suitable for use as a main subwoofer system with or without T Series augmentation
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency, high quality music reproduction
Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinets
specs
Transducers:Low Frequency: 2 x 12"
Frequency Response (-3dB):31.5Hz-120KHz
Max SPL:135dB
Rated Power (RMS):2000W
Rated Impedance:4ohm
Input Connectors:XLR x 2
Net Weight:41.7Kg
Gross Weight:45.5Kg
Dimensions (W x D x H):460 x 520 x 720mm
High output SPL and sensitivity
Two 12" high power low frequency driver
2000w power amplifier built in
Volume control
High cut control on output
Computer aided design to optimise frequency and phase response
Suitable for use as a main subwoofer system with or without T Series augmentation
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency, high quality music reproduction
Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinets
specs
Transducers:Low Frequency: 2 x 12"
Frequency Response (-3dB):31.5Hz-120KHz
Max SPL:135dB
Rated Power (RMS):2000W
Rated Impedance:4ohm
Input Connectors:XLR x 2
Net Weight:41.7Kg
Gross Weight:45.5Kg
Dimensions (W x D x H):460 x 520 x 720mm
Two 12" high power low frequency driver
2000w power amplifier built in
Volume control
High cut control on output
Computer aided design to optimise frequency and phase response
Suitable for use as a main subwoofer system with or without T Series augmentation
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency, high quality music reproduction
Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinets
specs
Transducers:Low Frequency: 2 x 12"
Frequency Response (-3dB):31.5Hz-120KHz
Max SPL:135dB
Rated Power (RMS):2000W
Rated Impedance:4ohm
Input Connectors:XLR x 2
Net Weight:41.7Kg
Gross Weight:45.5Kg
Dimensions (W x D x H):460 x 520 x 720mm
High output SPL and sensitivity
Two 12" high power low frequency driver
2000w power amplifier built in
Volume control
High cut control on output
Computer aided design to optimise frequency and phase response
Suitable for use as a main subwoofer system with or without T Series augmentation
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency, high quality music reproduction
Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinets
specs
Transducers:Low Frequency: 2 x 12"
Frequency Response (-3dB):31.5Hz-120KHz
Max SPL:135dB
Rated Power (RMS):2000W
Rated Impedance:4ohm
Input Connectors:XLR x 2
Net Weight:41.7Kg
Gross Weight:45.5Kg
Dimensions (W x D x H):460 x 520 x 720mm
$100 HIGH POWER 2000W RMS POWERED 2 x 12" SUBWOOFER
High output SPL and sensitivity
Two 12" high power low frequency driver
2000w power amplifier built in
Volume control
High cut control on output
Computer aided design to optimise frequency and phase response
Suitable for use as a main subwoofer system with or without T Series augmentation
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency, high quality music reproduction
Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinets
specs
Transducers:Low Frequency: 2 x 12"
Frequency Response (-3dB):31.5Hz-120KHz
Max SPL:135dB
Rated Power (RMS):2000W
Rated Impedance:4ohm
Input Connectors:XLR x 2
Net Weight:41.7Kg
Gross Weight:45.5Kg
Dimensions (W x D x H):460 x 520 x 720mm
Two 12" high power low frequency driver
2000w power amplifier built in
Volume control
High cut control on output
Computer aided design to optimise frequency and phase response
Suitable for use as a main subwoofer system with or without T Series augmentation
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency, high quality music reproduction
Integral 35mm pole receptacle for mounting full range or mid/high speaker cabinets
specs
Transducers:Low Frequency: 2 x 12"
Frequency Response (-3dB):31.5Hz-120KHz
Max SPL:135dB
Rated Power (RMS):2000W
Rated Impedance:4ohm
Input Connectors:XLR x 2
Net Weight:41.7Kg
Gross Weight:45.5Kg
Dimensions (W x D x H):460 x 520 x 720mm
$100 JBL MRX518S
$200 HIGH POWER 4500W POWERED DUAL 18" SUBWOOFER
High output SPL and sensitivity
Two 18" high power low frequency drivers
4500w Class D power Amplifier built in
Neutrik PowerCon input and output power supply connectors
High cut control
XLR Line input and output
Phase selector switch
Volume control
Computer aided design to optimise frequency and phase response
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency
Powered coated grill with foam backing
Durable Polyurethane textured base paint
Specs
Transducers:Low Frequency: 2x18"
Frequency Response (-3dB):40Hz-200KHz
Max SPL:132dB
Rated Power (RMS):4500W
Rated Impedance:4ohm
Input Connectors:XLR
Net Weight:86.0Kg
Gross Weight:91.0Kg
Dimensions (W x D x H):576 x 786 x 1075mm
Two 18" high power low frequency drivers
4500w Class D power Amplifier built in
Neutrik PowerCon input and output power supply connectors
High cut control
XLR Line input and output
Phase selector switch
Volume control
Computer aided design to optimise frequency and phase response
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency
Powered coated grill with foam backing
Durable Polyurethane textured base paint
Specs
Transducers:Low Frequency: 2x18"
Frequency Response (-3dB):40Hz-200KHz
Max SPL:132dB
Rated Power (RMS):4500W
Rated Impedance:4ohm
Input Connectors:XLR
Net Weight:86.0Kg
Gross Weight:91.0Kg
Dimensions (W x D x H):576 x 786 x 1075mm
$200 HIGH POWER 4500W POWERED DUAL 18" SUBWOOFER
High output SPL and sensitivity
Two 18" high power low frequency drivers
4500w Class D power Amplifier built in
Neutrik PowerCon input and output power supply connectors
High cut control
XLR Line input and output
Phase selector switch
Volume control
Computer aided design to optimise frequency and phase response
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency
Powered coated grill with foam backing
Durable Polyurethane textured base paint
Specs
Transducers:Low Frequency: 2x18"
Frequency Response (-3dB):40Hz-200KHz
Max SPL:132dB
Rated Power (RMS):4500W
Rated Impedance:4ohm
Input Connectors:XLR
Net Weight:86.0Kg
Gross Weight:91.0Kg
Dimensions (W x D x H):576 x 786 x 1075mm
Two 18" high power low frequency drivers
4500w Class D power Amplifier built in
Neutrik PowerCon input and output power supply connectors
High cut control
XLR Line input and output
Phase selector switch
Volume control
Computer aided design to optimise frequency and phase response
Suitable for use with any full range or mid/high speaker cabinets for extended low frequency
Powered coated grill with foam backing
Durable Polyurethane textured base paint
Specs
Transducers:Low Frequency: 2x18"
Frequency Response (-3dB):40Hz-200KHz
Max SPL:132dB
Rated Power (RMS):4500W
Rated Impedance:4ohm
Input Connectors:XLR
Net Weight:86.0Kg
Gross Weight:91.0Kg
Dimensions (W x D x H):576 x 786 x 1075mm